HP 100lx

Everything about vintage DOS based Palmtops goes in here...
Post Reply
leader1188
Regular user
Posts: 4
Joined: Thu Oct 22, 2015 12:25 pm

HP 100lx

Post by leader1188 » Wed Feb 03, 2016 6:20 pm

hi I have a problem with the HP 100LX.
I have a problem with using a CF card in the HP 100LX. I have thl 128 megabytes CF card. I tried to format it to FAT 12, 16, 32, but without result. I read that probably I have to install drivers on an HP 100LX. My problem is in that I do not have the cable from the HP 100LX, and I have no other cards. So I'm thinking about using infrared. I want to ask you if you do not know of any program (for Pocket PC or Palm or handheld with Win CE or Nokia mobile phone) to establish infrared communication and data transfer.
Thanks

Kyodai
Site Admin
Posts: 192
Joined: Fri May 15, 2015 7:33 pm

Re: HP 100lx

Post by Kyodai » Thu Feb 11, 2016 4:12 pm

So you used the CF card in a PCMCIA adaptor?

At first try the built-in fdisk100 program in the 100LX. That "fixes" all partitions on the card.

Then Just format it in the HP 100LX. Like "Format a:"...If that doesn't work then the card usually can't be used in the 100LX.

UNFORTUNATELY - not all CF cards are compatible with the 100LX. Sandisk usually always work, for some other cards its a bit of a gamble.

I once bought a big bag of old CF cards, nearly 2 dozen from 16MB to 128MB and like half of them work the others don't. Luckily nearly noone wants such old small cards so they are usually very cheap on ebay.


Here is a list from someone who tested loads of cards in a 200LX, but same results should also apply to 100LX:

http://www.hermocom.com/hplx/view-all-h ... oragecards

matrix
Regular user
Posts: 3
Joined: Thu Jan 28, 2016 3:59 pm

Re: HP 100lx

Post by matrix » Tue May 10, 2016 8:58 pm

Also, the HPLX mailing list is still active and full of helpful folks -- http://mail.eberl.com/cgi-bin/mailman/listinfo/hplx

Post Reply