Finally did a full backup of my Tidalwave PS-3000

Everything about vintage DOS based Palmtops goes in here...
Post Reply
Kyodai
Site Admin
Posts: 235
Joined: Fri May 15, 2015 7:33 pm

Finally did a full backup of my Tidalwave PS-3000

Post by Kyodai »

Well so far i didn't try any of the drivers on other palmtops...

But anyway for the sake of completeness here is the full backup of all 4 drives:


http://www.tankraider.com/userup/1494266543.zip

Most interesting (probably):

----------------------------------------------------------------------

Flash File System support
device=c:\tools\dblflash.exe
device=c:\tools\ms-flash.sys
----------------------------------------------------------------------
PCMCIA drivers:

device=f:\pcmcs.exe /FLASH /ADDR=D0 /NOPM
device=f:\pcmscd.exe /COM=2 /LEVEL
device=f:\pseudo.sys
----------------------------------------------------------------------

ATA TYPE III HDD or I/O Mode ( /0:slot A, /1:slot B )
device=c:\tools\pcmata.sys /0 /addr=ac
----------------------------------------------------------------------
ATA Card Memory Mode
device=c:\tools\sdpdrv.sys /d:2
----------------------------------------------------------------------

Memory card tool
C:\tools\MEMCARD.EXE
----------------------------------------------------------------------

Utility menu
C:\tools\UTIMENU.EXE







...and more

Kyodai
Site Admin
Posts: 235
Joined: Fri May 15, 2015 7:33 pm

Re: Finally did a full backup of my Tidalwave PS-3000

Post by Kyodai »

...and if you're curious or wanna run some of these through your hex-editor i have unpacked all executables - most were packed using PKLITE.

http://www.tankraider.com/userup/1494288901.zip

LyndonF
Posts: 1
Joined: Wed Jul 26, 2017 9:37 am

Re: Finally did a full backup of my Tidalwave PS-3000

Post by LyndonF »

Kyoedai wrote:
Mon May 08, 2017 11:08 am
...and if you're curious or wanna run some of these diet pills through your hex-editor i have unpacked all executables - most were packed using PKLITE.
Thanks for the backup!
Last edited by LyndonF on Wed Jun 20, 2018 5:37 am, edited 2 times in total.

Kyodai
Site Admin
Posts: 235
Joined: Fri May 15, 2015 7:33 pm

Re: Finally did a full backup of my Tidalwave PS-3000

Post by Kyodai »

You're welcome. Did you use the files on any tidalwave? Just being curious here... If i have time i gotta try them on a PS-1000, maybe the PCMCIA drivers work...

iRon
Posts: 1
Joined: Tue Aug 25, 2020 7:33 pm
Favorite Palmtop: HighScreen_Handy_Organizer

Re: Finally did a full backup of my Tidalwave PS-3000

Post by iRon »

Kyodai wrote:
Sun May 07, 2017 10:18 pm


But anyway for the sake of completeness here is the full backup of all 4 drives:
Thank you for the backup. Now my device also has a nice GUI. The PCMCIA drivers do not work with the highscreen organizer.

I exchange data via a PB G4 Titanium (Mac OS 9, no drivers required) and 2 x 1 MB SRAM cards.

I take the palmtop for the to-do list, always nice.

Many greetings from Germany and sorry for my bad English.



https://winworldpc.com/product/top-priority/10




IMG_1650.jpeg
IMG_1650.jpeg (258.56 KiB) Viewed 528 times




IMG_1651.jpeg
IMG_1651.jpeg (252.85 KiB) Viewed 528 times

Post Reply